More proof of the use of uranium in shaped charge liners

Sans titre

Also see my earlier article on uranium used in missiles and bombs.

The 1988 Sandia report on conical shaped charge design says that “Since only a relatively small percentage of the liner thickness forms the high velocity penetrating jet, 5 high density material (platinum, gold, etc.) plating of low density (aluminum for example) material would be very desirables. This would produce a multi-layered liner which would be much more efficient for a given CSC configuration. However, the cost of materials and liner forming processes usually prohibit the use of multi-layered liners. The use of single layered liners of depleted uranium and tantalum has been shown to be very effective”. Yet there is no significant US production of tantalum and the country relies on imports for this metal.

The metal said to be used mostly in shaped charges is copper. But one should take a look at this patent used for drilling wells into rock : “From this expression it can be calculated that if a mean density of 3 grams/cm3 is taken for hard rock and a jet length of 10 centimeter is considered, then with depleted Uranium used as the liner the penetration would be 25.2 centimeters. However, tests show that the penetration of such a Uranium jet is about 87 centimeters, a factor of 3.5 greater than expected and a factor of 5 times that measured for the copper jet and for an iron jet 5.4 times greater.”

Here is copper as compared with uranium in a Army Research Laboratory radiograph (copper is on top) :

Copper Uranium Shaped Charge Army Research Lab.PNG

The interest of uranium for shaped charge liners is known since the beginning of the 1970s at least ! See this book published by the National Academy of Sciences, “Trends in the use of depleted uranium”. P. 38 it says : Capture

Here is a process for making particulate uranium for liners http://www.google.ms/patents/US4592790

Making shaped charge liners with Uranium – this is a Canadian defense research report dating back, again, from 1973 https://tinyurl.com/mfpr6b5

This patent has quite a lot of info about uranium in shaped charge warheads http://www.google.co.ug/patents/US5279228

Here is an hybrid shaped charge / kinetic energy penetrator patent with uranium http://www.google.je/patents/US4463678

Lastly, here is a report from a US military laboratory (Air Force Armament Laboratory) about uranium liners for shaped charges, dating back from 1979 https://www.cdc.gov/niosh/ocas/pdfs/sec/nucmetals/pet/p195appendd1.pdf

It says that :

CDC.gov report

Read again : “if test firings of warheads fabricated from these materials are successful, commercially available DU would be immediately available to meet Air Force needs for a high density SFF warhead”. (SFF warheads are a kind of directed-energy warhead)

Let’s precise that it is clear the thermal effect is essential in these weapons.

blcreuse This clearly says the jet has a “high thermal effect”.

Take your time, look at the ARL experimentations with uranium liners, at the 1973 report on making shaped charges with uranium (the Canadian one) and at the drilling patent copper / uranium experiment. Do you… really believe… these uranium liners were never fabricated and used ? If you need more proof, see the day a shaped charge appeared on the sky…

Lastly, the UK MoD officially acknowledged (until 2006) that it undertook research, jointly with the French, on a shaped charge with uranium. See here for the archive :

Aug 95 Hydrocode Modelling of a Tandem Warhead System in Support of the Anglo French TA4 Programme

“Hydrocode” would refer quite clearly to the ductility of the uranium used as liner (so research quoted here probably wasn’t on cinetic penetrators, it was on liners).

Jan 99 Anglo-French research on a tandem warhead with depleted uranium lined rear charge

This one needs no further comment. “Rear” = mention of the main shaped charge in a tandem warhead (the anterior one is used to initiate explosive tank armour). So this was certainly for a Javelin-like missile. Maybe TRIGAT which initially involved Anglo-French (later German) research for a shaped-charge warhead ?

(Thanks Dai Williams for the Web Archive link)

Advertisements

6 comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s